working principle
A semi-automatic pneumatic capping machine includes a base, a control box, a column, a worktable, and a capping device. The capping device includes a power part, a first connecting plate, a second connecting plate, and a capping execution part. The capping execution part is installed on the column through the first connecting plate; The power part includes the cylinder, and the rolling mouth execution part includes the connecting central shaft, rolling mouth, limit sleeve, spring, connecting sleeve, rolling mouth sleeve, rolling mouth die sleeve, clamping spring, clamping ring, and rolling mouth die blade; The connecting shaft passes through the first connecting plate and is coaxially fixed to the lower end of the piston rod of the cylinder. The rolling mouth is connected to the lower end of the connecting shaft through screws, and the limit sleeve and the spring sliding sleeve are connected to the rolling mouth. The connecting sleeve is connected to the bottom of the first connecting plate through screws, and the rolling mouth sleeve is connected to the bottom of the connecting sleeve. The rolling mouth mold sleeve is connected to the bottom of the rolling mouth sleeve, and the top of the rolling mouth is connected to the cylinder through the central shaft. When the cylinder is connected to the air source, pressure is released to the central shaft, and the central shaft passes through the rolling mouth limit plate to shrink the rolling mouth plate to achieve the sealing effect.
Parameter Description
model: TFS15
Applicable cover material: pure aluminum cover/aluminum-plastic cover
Cover diameter: 15/18/22mm (one randomly provided)
Gas dissipation rate: 5L/minute
Work pressure: 0.4 Kpa
Net weight of machine: 16KG (desktop)
